 |
Cloud
Cover Stitch
This unique material is not a stabilizer but is designed to prevent
the fraying or shredding of silks and satins caused by heavy needle
penetration. It is fused to the back side of the fabric at 300
F using a pressing cloth. Due to its multi- directional stretch
and sheer, soft hand; it will not affect the drapability of your
garment or fabric. It also is used to cover the back of scratchy
stitches on infant items, placket shirts, ladies' tops, etc.
.
Directions
- Cut a
piece at least 1 inch larger than your embroidery area.
- Place
the fusible side (you can feel the adhesive with your finger
tips) ) to the reverse side of the fabric press at 300 degrees
F using a pressing cloth to protect the sheer fabric.
- Use a
stabilizer in conjunction with the Cloud Cover Stitch and embroider
the garment. You may be able to get by with a tearaway.
- . After
the embroidery is complete, apply Cloud Cover Stitch on the
reverse side to cover up the scratchy stitches. It will be soft
next to the skin.
Click here to purchase Cloud Cover Stich |